Prusa Printer
Currently, I have a Prusa MINI+.
Maker's Muse Slicer Settings
I use the following settings taken from Maker's Muse's recommendations. These are all for PrusaSlicer. I find that they generate a pretty reasonable draft product much faster than the default Prusa settings, which are quite conservative for obvious reasons. All speeds are in mm/s.
| Setting | Normal | High-Speed |
|---|---|---|
| Layers/Bottom solid layers | 4 | 3 |
| Layers/Top solid layers | 6 | 3 |
| Layers/Layer height | 0.20 | 0.30 |
| Speed/Bridges | 25 | 60 |
| Speed/External perimeters | 40 | 70 |
| Speed/Gap fill | 40 | 80 |
| Speed/Infill | 140 | 250 |
| Speed/Perimeters | 50 | 100 |
| Speed/Small Perimeters | 25 | 50 |
| Speed/Solid Infill | 140 | 250 |
| Speed/Support Material | 40 | 100 |
| Speed/Top Solid Infill | 40 | 100 |
| Infill/Fill Density | 20% | 10% |
| Infill/Fill Pattern | Grid | Adaptive Cubic |
You can download the exported configuration from here: prusa-mini-fast-profile.ini .
Engineering Fit for MINI+
Using some test prints, I was able to determine the following types of fits that work for me, at least with Jessie PLA. Fit is a specific mechanical relationship between (typically) a shaft and a hole. See my discussion of fit elsewhere for more details.
| Print Profile | Interference | Transition | Clearance | Filament |
|---|---|---|---|---|
| 0.15 Quality | 0.133 mm | 0.135 | 0.175 | Jessie PLA |
| 0.30 Maker's Muse | 0.135 mm | 0.155 | 0.175 | Jessie PLA |
I use these in Fusion360 to help parameterize the models.
Comments or Questions?
If you have any comments, questions, or topics you'd like to see covered, please feel free to either reach out to me on Mastodon (link below) or open an issue on Github.